We’ve used ADT across a few different projects. What keeps us going back is they actually know how our sites work, and work with us to find the best solutions.
Compressed Air DRYERS
PoleStar Smart-E Medium to Large Flow Compressed Air Refrigeration Dryers
Part #: PSE120-A4X03DF14EI
- Effective removal of water vapour (to +3°C pdp) from compressed air
- Works efficiently leaving low operating costs
- Dual frequency ready.
- Volume flows up to 10800m³/h (50Hz) or 11812m³/hr (60Hz) @ 7 barg
Product detail
Everything you need to specify
PoleStar Smart refrigeration dryers have been designed for the efficient removal of water from compressed air. Equipped with the patented SmartSave energy-saving feature PoleStar Smart refrigeration dryers continually and precisely modulates its mode of operation to meet prevailing operating conditions, resulting in accurate dew-point monitoring with corresponding aligned power consumption.
Furthermore, indirect cost savings, reducing the “hidden costs” of pressure drop are maximised by the use of a patented “all-in-one” aluminium heat-exchanger-SmartPack. Here the provision of large open channels and no-interconnecting pipe-work enables the free, un-interrupted passage of air through the dryer, resulting in pressure drops second to none.
Features
- Direct-expansion type refrigeration system
- The Energy Saving feature enables the dryers to save energy at partial load by cycling the refrigerant compressor while cooling the inlet air using the cold reserve stored in the SmartPack mass
- In compliance with the F-Gas regulation, low GWP environmentally friendly refrigerant R513A on all units
- Electronic controller, including touch screen versions from PSE 220
- Remote communication protocol, industry 4.0 ready, on all units; web server from model PSE220 and IoT ready from model PSE460
Benefits
- The most energy efficient compressed air refrigeration dryer
- Low pressure drops for lower operational costs
- Cost of ownership reduced
- Significantly contributes to the indirect reduction of CO2 into the environment
THE FINER DETAILS
Technical Specifications
Division
Gas Separation and Filtration Division EMEA
Brand
Parker
Technology
Filtration
Application
Compressed Air Applications
Cooling Method
Air Cooled
Product Style
Refrigeration
Product Series
PoleStar Smart-E
Industry
Industrial Manufacturing Equipment
Flow Rate
773.0 m3/hour at 7 barg, 60Hz, 455.0 CFM at 102 psig, 60Hz
Flow Rate
720 m³/h @ 7 barg (424 cfm @ 102 psig) 50 Hz
Pressure Dew Point
Standard: 3°C (37°F), Options: 7°C (45°F) or 10°C (50°F)
Refrigerant Type
R513A (Low GWP Refrigerant)
Operating Pressure
2 to 14 barg, 29 to 203 psig
Operating Temperature
5 to 65 °C, 41 to 149 °F
Ambient Temp
50.0 °C Maximum, 122.0 °F Maximum
Electrical Reqs
400V 3ph 50Hz / 460V 3ph 60Hz
Power Consumption
1.32 kW (50Hz), 1.7 kW (60Hz)
Port Size
2 inch
Connection Type
BSPP
Ingress Protection Rating
IP44 Indoor Use Only
Specifications Met
PED 2014/68/EU Fluid Group II
Height
1365.0 mm, 53.7 inch
Width
703.0 mm, 27.7 inch
Depth
1150.0 mm, 45.3 inch
Weight
205 kg, 452 lb
Why it matters
Clean, dry air pays back
The right filtration and drying shows measurable returns across the whole facility.
– Air loss
20-30%
Reduction in total air loss when leaks are properly sealed and repaired.
British Compressed Air Society
– ENERGY SAVINGS
~7%
Energy savings per bar of pressure drop recovered when filters are clean & dryers cleared
Hayley Dexis
– ELECTRICITY REDUCTION
10-15%
Electricity reduction as compressed air accounts for up to 30% of a facility’s total electricity bill
British Compressed Air Society
– INCREASED LIFESPAN
20-30%
Increase in the lifespan of pneumatic tools. Clean, dry air prevents this internal wear and tear.
Alup Kompressoren
All statistics have been researched and reported within reputable industry reports.
OUR Accreditations
WHAT WE DO
Find us by service or sector
Total care
More than a supplier – we’re a service partner
We provide complete sales and service support on all types of compressed air and gas treatment equipment. Our primary function is on‑site servicing of desiccant and refrigerant dryers, filtration and condensate management.
This includes
- Total Care Contracts
- Maintenance Contracts
- Call‑out servicing
- Trouble‑shooting service
- Operational advisory service
- Air Quality Testing
We also provide rental equipment
Whether you’re managing planned system maintenance, expanding temporary capacity, or facing an emergency breakdown, ADT provides short- and long-term rental units designed for immediate deployment.
Learn more about our financing options
ADT provide attractive finance deals to give you different options to pay for your equipment, including hire purchase and fixed-term rental options.
In our clients’ words
Trusted on the plant floor for a decade
Project Engineer, Waste Management
Didn’t realise how much our old system was costing us until ADT came in and did an assessment. The retrofit paid for itself faster than we expected.
Engineering Technician, Pharmaceutical Manufacturing
ADT continues to be a trusted partner of ours, consistently delivering reliable service and exceptional support whenever we need it.
Mechanical Planner, Cement Works & Quarry
We have worked with ADT for over 10 years and deeply appreciate their unparalleled understanding and industry expertise.
Technical Engineer, Nuclear Power Station
OUR CLIENTS
