We’ve used ADT across a few different projects. What keeps us going back is they actually know how our sites work, and work with us to find the best solutions.
DESiccant dryers
KE-MT Series Large Flow Heatless Compressed Air Dryer
Large flow heatless compressed air dryers
- Available flow rates up to 6100m³/h @ 7 barg
- Pressure dew points of -25°C to -70°C
- For industrial compressed air treatment applications.
Product detail
Everything you need to specify
Parker KE-MT Series heatless adsorption dryers are designed to supply high quality dry compressed air reliably and efficiently down to a pressure dew point of -70 °C. They are capable of volume flows of up to 6100m³/h at operating conditions of 7 barg (100psig).
The KE-MT Series is offered with energy saving dew point dependent switching (DDS) as an option. Where an application calls for a unit able to cope with variations in operating pressure and load, the installation of a dew point sensor at the outlet of the dryer is available. In such an operating mode, the changeover cycle between vessels only takes place when required, and is dependent on the required dew point being achieved. Only upon reaching this adjustable set dew point, does changeover to the regenerated vessel occur. This feature enables the drying phase to be lengthened and thus avoids the unnecessary use of purge air for regeneration and consequently provides significant energy savings.
When there is a further requirement for compressed air to be delivered free from oil vapour and odours, as well as clean and dry, the units can be supplied with an additional third vessel filled with activated carbon, the KEA-MT Series. KEA-MT is ideal for use in laboratory, food, beverage and pharmaceutical applications.
THE FINER DETAILS
Technical Specifications
Maximum Flow Rate:
706 to 3590 CFM at 101 psig, PDP -13°F
Maximum Operating Pressure:
10 barg, 145 psig
Maximum Ambient Temperature:
50 °C
Minimum Ambient Temperature:
1.5 °C
Ingress Protection Rating:
IP65
Maximum Operating Temperature:
50 °C, 122 °F
Minimum Operating Temperature:
25 °C, 77 °F
Brand:
Zander, Parker, Parker
Specifications Met:
PED 97/23/EG Module D+B Category II, others on request
Port Size:
DN50 to DN125
Connection Type:
Flanged according to EN1092-1
Weight:
640 to 2850 kg
Width
1060 to 2160 mm
Depth
840 to 1565 mm
Height
2080 to 2820 mm
Electrical Requirements:
230V, 50-60Hz
Controller Type:
Multitronic
Minimum Operating Pressure:
5 barg, 72.52 psig
Power Consumption:
7.2 VA
Product Type:
Heatless
Pressure Dew Point:
-25 to -70 °C, -13 to -97 °F
Why it matters
Clean, dry air pays back
The right filtration and drying shows measurable returns across the whole facility.
– Air loss
20-30%
Reduction in total air loss when leaks are properly sealed and repaired.
British Compressed Air Society
– ENERGY SAVINGS
~7%
Energy savings per bar of pressure drop recovered when filters are clean & dryers cleared
Hayley Dexis
– ELECTRICITY REDUCTION
10-15%
Electricity reduction as compressed air accounts for up to 30% of a facility’s total electricity bill
British Compressed Air Society
– INCREASED LIFESPAN
20-30%
Increase in the lifespan of pneumatic tools. Clean, dry air prevents this internal wear and tear.
Alup Kompressoren
All statistics have been researched and reported within reputable industry reports.
OUR Accreditations
WHAT WE DO
Find us by service or sector
Total care
More than a supplier – we’re a service partner
We provide complete sales and service support on all types of compressed air and gas treatment equipment. Our primary function is on‑site servicing of desiccant and refrigerant dryers, filtration and condensate management.
This includes
- Total Care Contracts
- Maintenance Contracts
- Call‑out servicing
- Trouble‑shooting service
- Operational advisory service
- Air Quality Testing
We also provide rental equipment
Whether you’re managing planned system maintenance, expanding temporary capacity, or facing an emergency breakdown, ADT provides short- and long-term rental units designed for immediate deployment.
Learn more about our financing options
ADT provide attractive finance deals to give you different options to pay for your equipment, including hire purchase and fixed-term rental options.
In our clients’ words
Trusted on the plant floor for a decade
Project Engineer, Waste Management
Didn’t realise how much our old system was costing us until ADT came in and did an assessment. The retrofit paid for itself faster than we expected.
Engineering Technician, Pharmaceutical Manufacturing
ADT continues to be a trusted partner of ours, consistently delivering reliable service and exceptional support whenever we need it.
Mechanical Planner, Cement Works & Quarry
We have worked with ADT for over 10 years and deeply appreciate their unparalleled understanding and industry expertise.
Technical Engineer, Nuclear Power Station
OUR CLIENTS
